COMPLETE HANDGUN
*INSURANCE APPRAISALS INCLUDED
*MOST REPAIRS TO A FIREARM CAN BE DONE WITHIN AN HOUR - LABOR CHARGED ON THE QUARTER HOUR
IF CUSTOMER PROVIDES PART
*CONSULTATION NECESSARY FOR MOST CUSTOMIZATIONS
ONE COLOR
TWO COLORS
THREE COLOR
Add a description about this item
DEPENDING ON THE COMPLEXITY OF THE DESIGN
FULL HAND GUN INCLUDING STENCIL
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
DEPENDING ON THE COMPLEXITY OF THE PATTERN
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
DEPENDING ON THE COMPLEXITY OF THE PATTERN
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
Add a description about this item
PRICING INCLUDES MASKING
Add a description about this item
Add a description about this item
Add a description about this item
CALL FOR QUOTE
Add a description about this item
Add a description about this item
Add a description about this item
3 MAG MINIMUM
Is the most durable of the standard Cerakote family of coatings and provides the best performance in hardness, wear and scratch resistance, adhesion and rust resistance. It can withstand heat up to 500f – 600f degrees and comes in the widest range of colors. Therefore, we use the H-Series wherever possible. However, it’s a two-part heat cure finish and, therefore, cannot be applied to optics and other items or substrates which cannot, or should not be cured at the required temperatures.
For high-temp applications up to 1700°, such as suppressors and machine gun barrels, Cerakote™ C-Series has no equal. We also use C-Series to coat scopes and other optics, as well as fiberglass and items and substrates which cannot be baked. It is not as durable as the H-Series and is less scratch and wear resistant. The primary application is optics, electronics and fiberglass stocks which cannot be hear cured
RUST RESISTANCE: Cerakote™ finishes have been tested in salt spray and full immersion and have withstood beyond 3,000 hours in salt spray and hundreds of hours in full immersion testing. These results outperform other finishes by over 10x. This makes Cerakote™ finishes the clear choice for marine environments and other environments subject to high humidity and salt water environments.
Cerakote™ finishes can withstand over 5,000 (5,212) wear cycles per mil (.0001). The Tabor wear test uses an 8″ abrasive wheel applied to a metal plate coated with 1 mil thickness of the Cerakote coating. In addition, Cerakote’s Coefficient of Friction is 80% less than stainless steel against stainless steel. So, when one or both moving parts of a firearm are coated you can expect a significantly longer product duty cycle or service life.
Cerakote finishes have an ASTM D3359 rating of 5B and can withstand a 180° mandrel bend rotation test around a 1/4″ mandrel and a ball bearing impact test of 160 inch-lbs with no cracking or loss of adhesion. This is significant performance given Cerakote’s 9H pencil hardness, which is the highest hardness rating in the scale.
ASTM D3363 is a 9H pencil hardness and 6H scratch resistance.
FILM THICKNESS: 1.0 mil (Cerakote DFAC “Dry Film Anti-Carbon” is .25 to .50 mil)
Copyright © 2021 American Pride Firearms - All Rights Reserved.